You can boot into the OS X recovery partition at any time by restarting your Mac (through Apple menu Restart) and then simultaneously holding down Command R until the Apple logo appears. If the Mac boots up as normal, you'll have to repeat the process, taking care not to hold down the keys too late or release them too early. Getting Kik on Your Mac Once you've installed your emulator, booting it up should present you with a window that looks remarkably like an Android home screen. For all intents and purposes, it is! It will be complete with all of the standard tools and features that you'd find on an Android device, including that all-important Google Play store.
This page has two sections. First up is a table of commands, and then later in the page, you'll find a quick and dirty guide (originally posted as its own article) on actually getting into and using the cross environment.Command | Purpose |
exit | Exit the crosh Shell |
help | Display the crosh help |
help_advanced | Show advanced crosh commands; primarily used for debugging. |
ping | [-c count] [-i interval] [-n] [-s packetsize] [-W waittime] < destination >Send ICMP ECHO_REQUEST packets to a network host. If < destination > is 'gw' then the next hop gateway for the default route is used.It works just like the ping command on other operating systems. Press Ctrl+C to stop the ping process or halt any other command in Crosh. |
ssh | Starts the ssh subsystem if invoked without any arguments.'ssh < user > < host >', 'ssh < user > < host > < port >', 'ssh < user >@< host >'. or 'ssh < user >@< host > < port >' connect without entering the subsystem. |
ssh_forget_host | Remove a host from the list of known ssh hosts. This command displays a menu of known hosts and prompts for the host to forget. |
top | Sets the chapsd log level. No arguments can start verbose logging. |
battery_test [< test length >] | Tests battery discharge rate for given number of seconds. No argument will default to 300s test. |
bt_console | Enable the Bluetooth debugging console |
chaps_debug [start | stop | < log_level >] | Sets the chapsd logging level. No arguments will start verbose logging. |
connectivity | Shows connectivity status. |
experimental_storage < status | enable | disable > | Enable or disable experimental storage features. |
ff_debug [< tag_expr >] [–help] [–list_valid_tags] [–reset] | Add and remove ff debugging tags. |
memory_test | Performs extensive memory testing on the available free memory. |
modem < command > [args…] | Interact with the 3G modem. Run 'modem help' for detailed help. |
modem_set_carrier carrier-name | Configures the modem for the specified carrier. |
network_diag [–date] [–link] [–show-macs] [–wifi] [–help] [–wifi-mon] < host > | A function that performs a suite of network diagnostics. Saves a copy of the output to your download directory. |
network_logging < wifi | cellular | ethernet > | A function that enables a predefined set of tags useful for debugging the specified device. |
p2p_update [enable | disable] | Enables or disables the peer-to-peer (P2P) sharing of updates over the local network. This will both, attempt to get updates from other peers in the network and share the downloaded updates with them. Run this command without arguments to see the current state. |
rlz < status | enable | disable > | Enable or disable RLZ. |
rollback | Attempt to rollback to the previous update cached on your system. Only available on non-stable channels and non-enterprise enrolled devices. Please note that this will powerwash your device. |
route [-n] [-6] | Display the routing tables. |
set_apn [-n < network-id >] [-u < username >] [-p < password >] < apn > | Set the APN to use when connecting to the network specified by < network-id >. If < network-id > is not specified, use the network-id of the currently registered network. |
set_apn – c | Clear the APN to be used, so that the default APN will be used instead. |
set_arpgw < true | false > | Turn on extra network state checking to make sure the default gateway is reachable. |
set_cellular_ppp [-u < username >] [-p < password >] | Set the PPP username and/or password for an existing cellular connection. If neither -u nor -p is provided, show the existing PPP username for the cellular connection. |
set_cellular_ppp -c | Clear any existing PPP username and PPP password for an existing cellular connection. |
sound < command > < argument > | Low level sound configuration. Can be used to play/record audio samples and enable beam forming on Pixel.'sound beamforming < on | off >' will enable/disable the feature.'sound record [duration]' will start recording.'sound play < filename >' will play the recorded audio samples. |
storage_status | Reads storage device SMART health status, vendor attributes and error log. |
storage_test_1 | Performs a short offline SMART test. |
storage_test_2 | Performs an extensive readability test. |
syslog < message > | Logs a message to syslog. |
tpcontrol {status | taptoclick [on|off] sensitivity [1-5] | set < property > }tpcontrol {syntp [on|off]} | Manually adjust advanced touchpad settings. |
tracepath [-n] < destination >[/port] | Trace the path/route to a network host. |
update_over_cellular [enable|disable] | Enables or disables the auto updates over cellular networks. Run without arguments to see the current state. |
upload crashes | Uploads available crash reports to the crash server. |
wpa_debug [< debug_level >] [–help] [–list_valid_level] [–reset] | Set wpa_supplicant debugging level. |
xset m [acc_mult[/acc_div] [thr]]xset m default | Tweak the mouse acceleration rate. |
xset r rate [delay [rate]] | Tweak autorepeat rates. The delay is the number of milliseconds before autorepeat starts. The rate is the number of repeats per second. |
xset r [keycode] < on|off > | Turn autorepeat on/off. If keycode is specified, it affects only that key. If not specified, it affects global behavior. |
- Find commands:
help
- Find debugging commands:
help_advanced
- To switch to a more bash-like command prompt:
shell
- To see the version of Chrome OS running on your Chromebook:
sudo /opt/google/chrome/chrome –version
- To show the operating system name:
uname -a
- If the operating system is a bit old, update it using the update_engine_client command:
update_engine_client -update
- To see the bios of your Chromebook, open up a command prompt (Control-Alt-T) and use the following command:
sudo /usr/sbin/chromeos-firmwareupdate -V
- To record some sound from the microphone, use the sound command:
sound record NUMBEROFSECONDS
Look for (or grep for) BIOS version in the output. - To see the Vital Product Data, or configuration information such as time zone, UUID, IMEI, model, region, language, keyboard layout and serial number:
sudo dump_vpd_log --full --stdout
- Or to be specific about what you're looking for, grep for it:
sudo dump_vpd_log --full --stdout | grep 'serial_number'
- To capture some logs for debugging, use systrace:
sudo systrace
- To manage the mouse and keyboard acceleration and autorepeat options, use the xset command:
xset m
- Trace a network path (like traceroute or tracert):
tracepath www.google.com
- To run standard network diagnostics:
network_diag
- To capture some packets while troubleshooting network connections, use the packet_capture command:
packet_capture
- Check the type, version, etc on your touchpad:
tpcontrol status
- You can also debug network connections by logging data going through either the wifi, cellular or ethernet interface using the network_logging command. To do so for a normal 802.11 connection:
network_logging wifi
- To configure WAP information:
wpa_cli
- Accept an SSL Cert by using the enterprise_ca_approve command:
enterprise_ca_approve --allow-self-signed https://entca.krypted.com
sudo ifconfig eth0
- To see all of the running processes:
top
- To see a user's hid and gid, use id:
id
- To see more information To ping Google:
ping www.google.com
- To see a list of the commands you've run:
shell_history
- To close the command prompt:
exit
- To make the file system writeable, first fire up a command prompt via crosh, by using Control-Alt-T and then running the shell command at the shell prompt:
shell
- Then run the following shell script to remote rootfs verification and make the file system writeable:
sudo /usr/share/vboot/bin/make_dev_ssd.sh --remove_rootfs_verification
- Then reboot and do whatever it is you need to do.For example, install a vine server and run automation scripts to do regression testing. Enjoy.
We'll soon start working on a Mac version of Amiga Forever, inclusive of the high-quality playback and authoring functionality our customers are enjoying on Windows. If you would like to be informed about updates concerning Amiga Forever for macOS, please enter your email address below.
Privacy information: The above field sends your request to the Amiga Forever team at Cloanto. The email address will be used only to contact you about Amiga Forever for macOS. No information is stored on the web server. In addition to the data you provide, your IP address and time information are logged in the same way as they normally appear in email headers. Additional legal and privacy notes apply.
The preconfigured Amiga ROM, OS and application software files distributed with the existing version of Amiga Forever (Plus Edition) can already be used with different macOS ports of the UAE Amiga emulation software.
K Cking Mac Os Catalina
Ready-to-run and preconfigured universal binaries of E-UAE and Hi-Toro are included in the Private/Mac directory on the Amiga Forever CD.
Note: The current cross-platform content in Amiga Forever, while compatible with Mac applications, is not as user friendly as the Windows version. It is intended for a more technical audience who is already familiar with emulation on the intended platform.
The additional Windows-only software included in Amiga Forever does not run on macOS. This includes the Amiga Forever one-click launcher, Software Director and Amiga Explorer. Also, there is no Mac-specific installer included in Amiga Forever (the files have to be copied manually from the Private/Mac directory of the Amiga Forever distribution to the desired destination folder on the Mac hard disk).
Although older, pre-macOS X versions of UAE are known to work with the ROM and operating system files included with Amiga Forever, we recommend the use of one of the following newer ports and add-ons for macOS:
- FS-UAE, maintained by Frode Solheim
- E-UAE, maintained by Richard Drummond
- E-UAE universal binaries by Jens Weichert
- Hi-Toro Configuration Editor
K Cking Mac Os Download
Amiga Forever includes a configuration file which is ready to run with MaxUAE, and UAE (for GNU/Linux) configuration files which should work well with all versions of UAE, including the macOS port.
Additional Information
The dungeoning (itch) mac os. For additional cross-platform information, please refer to: